WINDROW TURNER
Aerated (Turned) Windrow Composting is a type of composting that involves forming organic waste into rows of long piles called “windrows” and aerating them periodically by either manually or mechanically turning the piles.
Turned Windrow Composting is suited for large volumes of compost, like compost that has been collected by entire communities or local governments and high volume food-processing businesses (e.g., restaurants, cafeterias, packing plants). This process will yield significant amounts of compost that can then be used for future agriculture purposes.
One of the benefits of Windrow Composting are large volumes of diverse wastes that can be collected and composted such as yard trimmings, grease, liquids, and animal byproducts (such as fish and poultry wastes).
TURN BERCAMPS -
VCC 3000
Designed to be transported easily and comfortably to different composting points. The working arch rests vertically on a trolley when transported. This machine has a lot of stability in transport and at work (the tractor pulls directly from the cart).
GENERAL CHARACTERISTICS:
-
Its length of 3 meters and the possibility of raising it on the trolley make the VCC-3000 a very maneuverable machine.
-
Maintenance is simple and inexpensive.
-
All wear plates are made of HARDOX 450 steel.
-
Robust and balanced turning shaft that turns the material to be composted correctly (from the inside to the outside).
-
Quick aerobic composting, between 8-12 weeks, depending on the material.
-
Big wide tires and consequently low ground pressure.
-
Approved for driving on public roads.
-
It must be greased every 8 working hours.
TECHNICAL CHARACTERISTICS:
-
Turning capacity up to: 700 m³ / h to 1000 m³ / h depending on the material.
-
Turning axle width: 3,000 mm.
-
Total width in transport position: 2,400 mm.
-
Total length: 4,150 mm.
-
Internal dimension of the tunnel height: 1,600 mm.
-
Total height to circulate on public roads: 4,000 mm and working height: 1,600 mm.
-
Ideal working speed: 300-400 m / h • Weight: 4,500 kg • Stack: width x height 3,500 x 1,600.
-
For tractors with at least 80 HP, total width up to 2,500 m and super slow speeds: taking in first gear between 200-400 m / h at 540 revolutions per minute at the power take-off.
-
Tractor working pressure: 190-200 bar.
BASIC EQUIPMENT:
-
Sheet steel tunnel, with direct drive on the turning shaft
-
Wide tires 400/60 / 15.5 14PR.
-
Lighting system.
-
Front tow hitch: BBM7042 ring coupling.
-
Changes from transport position to work hydraulically.
-
Fuse in the power take-off.
OPTIONAL EQUIPMENT:
-
Complete irrigation system with mechanical drive. It includes a water pump, spray bars with sprayers and a frame for the 1,000-liter tank (via tractor control valve).
-
1,000 liter water tank.
-
Scharmüller K80 or Piton hitch ball and BBM7042 hitch ring.
TURNOVER BERCAMPS - VC 2000
For tractors with at least 50 hp. Has a turning capacity up to 500 m³/h.
GENERAL CHARACTERISTICS:
-
Turning capacity up to 500 m³/h (depending on material).
-
For tractors from 50 CV.
-
Maneuverable machine; the VC-2000 only has a length of 2 meters.
-
Low maintenance costs, easy maintenance.
-
Easy handling, simple to use
-
The massive construction of the tunnel with a dome shape and 6 mm of steel achieves great stability.
-
All wear plates are made of HARDOX 450 steel.
-
Robust and balanced turning shaft that turns the material to be composted correctly (from the inside to the outside).
-
Rapid aerobic composting; between 8-12 weeks, depending on the material.
-
Big wide tires and consequently low ground pressure.
-
Approved for driving on public roads.
-
It must be greased every 8 working hours.
TECHNICAL CHARACTERISTICS:
-
Turning capacity up to 500 m³/h.
-
Width of the turning axis: 2,000 mm.
-
Total width in transport position: 2,800 mm.
-
Total length in working position: 4,372 mm.
-
Total length for driving on public roads: 4,000 mm.
-
Internal dimension of the tunnel height: 1,300 mm.
-
Overall height: 1,400mm.
-
Ideal working speed: 150-300 m/h depending on the material.
-
Weight: 1,980 kg.
-
Pile: width x height 1,500 x 1,300.
TRACTOR REQUIREMENTS:
-
For tractors with at least 50 hp.
-
For tractors with super slow speed: driving in first gear between 100-200 m/h at 350 revolutions per minute in the PTO.
BASIC EQUIPMENT:
-
Steel sheet tunnel, with direct drive on the turning shaft.
-
Tires 10.0/80-12 10PR.
-
Lighting system.
-
Fuse in the power take-off.
-
It is hooked with a drawbar to the hydraulic arms.
OPTIONS FOR THE VC-2000:
-
Steel sheet tunnel, with direct drive on the turning shaft.
-
Tires 10.0/80-12 10PR.
-
Lighting system.
-
Fuse in the power take-off.
-
It is hooked with a drawbar to the hydraulic arms.